LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2005 >> LeSabre Custom, 4T65E/MN3 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Introduction >> Repair Instructions >> Idle Air Control (IAC) Valve Replacement >> Removal Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal Procedure

    Fig 1: Removing/Replacing Fuel Injector Sight Shield & Fuel Pressure Connection Cap
    GM49594Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (L36) in Engine Mechanical.
    2. Fig 2: View Of IAC Valve Electrical Connector
    GM155466Courtesy of GENERAL MOTORS CORP.
  2. Remove the electrical connector from the idle air control (IAC) valve.
    3. Fig 3: Removing/Installing IAC Valve Attaching Screws
    GM200431Courtesy of GENERAL MOTORS CORP.
  3. Remove the 2 IAC valve attaching screws.
    4. Fig 4: Removing/Installing IAC Valve
    GM481081Courtesy of GENERAL MOTORS CORP.
  4. Remove the IAC valve from the throttle body.
    5. Fig 5: Removing/Installing IAC Valve "O" Ring
    GM481091Courtesy of GENERAL MOTORS CORP.
  5. Remove the O-ring from the idle air control valve.
  6. Inspect the O-ring for cracks or damage. Replace the O-ring if necessary.
scientia non olet · About LEMON Manuals