LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2005 >> Century Limited >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Controls - Introduction >> Repair Instructions >> Intake Air Temperature (IAT) Sensor Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

    Fig 1: Locating Air Cleaner Intake Duct Components
    GM811623Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the intake air temperature (IAT) sensor electrical connector (3).
  2. Carefully grasp the sensor and with a twisting and pulling motion, remove the IAT sensor (1) from air cleaner intake duct.
scientia non olet · About LEMON Manuals