Conditions For Running the DTC

DTCs P0101, P0102, P0103, P0107, P0108, P0112, P0113, P0117, P0118, P0121, P0122, P0123, P0125, P0171, P0172, P0201, P0202, P0203, P0204, P0205, P0206, P0300, P0401, P0403, P0404, P0405, P0406, P0502, are not set.
The Engine Run Time parameter is more than 2 minutes.
The ECT Sensor parameter is more than 70° C (158° F).
The IAT Sensor parameter is more than -18° C (-0.4° F).
The BARO parameter is more than 74 kPa.
The Ignition 1 Signal parameter is between 9-18 volts.
The TP Sensor parameter is less than 1.4 percent.
The Vehicle Speed Sensor parameter is less than 5 km/h (3 mph).
The Spark parameter is not more than 80 degrees or is less than -80 degrees for longer than 409 seconds.
DTCs P2A01, P0401, P0420 are not performing intrusive tests.
The above conditions are met for more than 2 seconds.
DTC P0507 runs continuously when the above condition is met.