Installation Procedure
WARNING: This page is about a different car, the 2005 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
- Align the radio with the center stack and mounting holes.
- Connect the electrical connectors and the antenna connectors from the rear of the radio.
- Install the bolts that hold the radio to the I/P center stack.
- Align the trim panel I/P center to the I/P. Refer to Trim Panel Replacement - Instrument Panel (I/P) Center in Instrument Panel, Gages, and Console.
- Align and move the forward center console in place with the center console bracket. Refer to Console Replacement in Instrument Panel, Gages and Console.
- Setup the new radio assembly. Refer to Control Module References in Computer/Integrating Systems.