LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2004 >> Rendezvous Ultra >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.6L (Ly7) (Introduction) >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

  1. Remove the fuel tank. Refer to Fuel Tank Replacement (Prior to VIN 4S558922 (100mm Sender)) or Fuel Tank Replacement (VIN 4S558922 and Later (130mm Sender)) .
    2. Fig 1: Identifying Electrical Connector From The Fuel Tank Vapor Pressure Sensor
    GM1404551Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connector from the fuel tank vapor pressure sensor.
    3. Fig 2: View Of Fuel Tank Pressure Sensor
    GM1404558Courtesy of GENERAL MOTORS CORP.
  3. Remove the fuel tank pressure sensor from the fuel sender.
scientia non olet · About LEMON Manuals