LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2003 >> Regal GS >> Repair and Diagnosis >> External Pages >> Different car >> Section 437 (Seat System) >> Repair Instructions >> Trim Panel Replacement - Front Seat >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

WARNING: This page is about a different car, the 2004 Buick Regal and 2004 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Front Seat Trim Panel
    GM310416Courtesy of GENERAL MOTORS CORP.
  1. Install the finish panel to the seat.
  2. Connect the power seat switch electrical connector, if equipped.
  3. Use new clips in order to snap the finish panel to the seat cushion frame.
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the finish panel screws.

    Tighten:  Tighten the screws to 3 N.m (27 lb in).

  5. Install the retainer to the base of the recliner handle.
  6. Install the recliner handle.
scientia non olet · About LEMON Manuals