LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2003 >> Century Base >> Repair and Diagnosis >> Suspension >> Wheel Alignment Specifications & Adjustment Procedures >> Repair Instructions >> Front Camber Adjustment >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  1. Install the strut to the vehicle. Refer to STRUT, STRUT COMPONENT AND/OR SPRING REPLACEMENT in Front Suspension.

    Tighten 

    Tighten the strut-to-knuckle bolts as far as to allow movement of the knuckle.

  2. Install the tire and wheel assemblies. Refer to TIRE AND WHEEL REMOVAL AND INSTALLATION in Tires and Wheels.
  3. Adjust the camber (1).

    Tighten 

    Tighten the strut-to-knuckle bolts to 122 N.m (90 lb ft).

    Fig 1: Identifying Front Camber
    G01569396Courtesy of GENERAL MOTORS CORP.
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals