LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2003 >> Century Base >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Stabilizer Shaft Link Replacement >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

  1. Install the stabilizer link into the vehicle.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the stabilizer shaft link bolt and nut.

    Tighten 

    Tighten the stabilizer shaft link nut to 23 N.m (17 lb ft).

    Fig 1: Installing Stabilizer Shaft Link Bolt & Nut
    G01569416Courtesy of GENERAL MOTORS CORP.
  3. Install the tire and wheel assembly. Refer to TIRE AND WHEEL REMOVAL AND INSTALLATION in Tires and Wheels.
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals