LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2002 >> Regal GS >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat System >> Repair Instructions >> Trim Panel Replacement - Front Seat >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

  1. Install the finish panel to the seat.
  2. Fig 1: Identifying Front Seat Trim Panel
    G01756168Courtesy of GENERAL MOTORS CORP.
  3. Connect the power seat switch electrical connector, if equipped.
  4. Use new clips in order to snap the finish panel to the seat cushion frame.
    NOTE: Refer to FASTENER NOTICE .
  5. Install the finish panel screws. Tighten the screws to 3 N.m (27 lb in).
  6. Install the retainer to the base of the recliner handle.
  7. Install the recliner handle.