Scan Tool Data Definitions
- Accum Fault- Compressor
Defined period of time the compressor is active with out an exhaust cycle. - ALC Compressor Active
Indicates when the compressor is running. - ALC Exhaust Solenoid Active
Indicates when the exhaust solenoid is on. - ALC Relearn
This procedure reprograms the RIM with the ride height specification, per the suspension option. - Battery Low-Compressor
This indicates when there is low voltage at compressor. - Calibration I.D.
This number designates the modules calibration. - Exhaust
Defined period of time that the exhaust is active with out a compressor cycle. - Filtered Position Valve
As the vehicle operates the suspension position sensor is monitored, and the information is filtered, to the RIM so it can adjust the suspension. - Leveling Sensor Feed
Voltage feed to the suspension position sensor. - Progress Fault- Compressor
Defined period of time the that the compressor is active, and a change is not detected by the sensor. - Progress Fault- Exhaust
Defined period of time that the exhaust is active and no change is detected at the sensor. - Prom I.D.
The modules internal "PROM" identifier. - Suspension Position Sensor
Indicates the sensor signal voltage to the control module. - Trim Value
A value programed in the RIM.