LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2000 >> LeSabre Custom, 4T65E/MN3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Wiper System And Washer System) >> Repair Instructions >> Windshield Outside Moisture Sensor Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2002 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connector to the rain sensor module. See Figure.
  2. Install the rain sensor module in the windshield coupler.
  3. Fasten the windshield coupler clips.
  4. Install the trim cover on the rain sensor module. See Figure.
scientia non olet · About LEMON Manuals