LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2000 >> LeSabre Custom, 4T65E/MN3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 136 (Wiper System And Washer System) >> Repair Instructions >> Washer Solvent Container Level Sensor Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2005 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Water Solvent Level Sensor
    GM720467Courtesy of GENERAL MOTORS CORP.
  1. Install the washer solvent level sensor in the washer solvent container.
    2. Fig 2: View of Washer Solvent Container
    GM747843Courtesy of GENERAL MOTORS CORP.
  2. Connect the electrical connector to the washer solvent level sensor.
  3. Install the right front fascia extension. Refer to Fascia Extension Replacement - Front in Bumpers.
  4. Fill the washer solvent container.
scientia non olet · About LEMON Manuals