Without DIC
NOTE:
If vehicle is equipped with DIC, DIC or scan tool must be used to change modes. See AUTOMATIC DOOR LOCKS
for procedure.
- Turn ignition on. Press and hold power door lock switch in LOCK position throughout this procedure. All doors will lock.
- Using RKE transmitter, press UNLOCK button on transmitter. Lock delay is still off and all doors remain locked.
- Press UNLOCK button on transmitter again. Lock delay is now active and all doors will unlock.
- Release power lock switch. To turn feature off, repeat previous procedure.
This procedure only changes mode for transmitter being used. Procedure must be repeated for each transmitter.