Throttle Position (TP) Sensor: Installation
WARNING: This page is about a different car, the 1995 Pontiac Bonneville, 1995 Oldsmobile Eighty-Eight, and 1995 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
- With throttle valve in closed position, install TP sensor on throttle body. Ensure TP sensor lever engages with drive lever on throttle shaft. Install retaining screws and electrical connection.
- TP sensor is self-zeroing and is not adjustable. On 4.9L with adjustable TP sensor, adjust TP sensor to specification and tighten retaining screws. See ADJUSTMENTS article in this section.