LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 1979 >> Skyhawk S, Automatic Trans >> Repair and Diagnosis >> Suspension >> Suspension Control Systems >> Electronic Level Control >> Electrical Trouble Shooting >> Compressor Runs Continuously
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Compressor Runs Continuously

  1. Disconnect yellow wire (brown wire on Buick models) from compressor relay connector and plug connector back on relay.
    • If compressor still runs, replace relay.
    • Be sure that 8-14 second delay functions. If delay fails to function, replace height sensor.
  2. Disconnect height sensor wiring.
    • If compressor stops, replace height sensor.
    • If compressor still runs, locate open in wire from terminal No. 3 to relay.
  3. Check height sensor time delay function.
    • If no time delay, replace both sensor and relay.
    • If time delay is good, check circuit between compressor relay and height sensor for intermittent grounding condition.
  4. Check for defective relay by tapping on case. If relay clicks, replace it.
scientia non olet · About LEMON Manuals