11 31 Camshaft
N55 ENGINE (2016-2018):
11 31 CAMSHAFT - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Upper and lower bearing strip of camshaft (steel screw 10.9) | N55 | M7x70 | Insert screws dry Jointing torque Angle of rotation |
8 Nm 60° |
| 2AZ Eccentric shaft bearing cap to cylinder head | N55 | M6x27 | 8.5 Nm | |
| 3AZ Camshaft bearing cap to cylinder head | N55 | M6x30.5 | 8.5 Nm | |
| 4AZ Chain drive module to cylinder head | N55 | M6x35 | 8 Nm | |
| 5AZ Guide rail to crankcase | N55 | M8 | 20 Nm | |
| 6AZ Guide rail to cylinder head | N55 | M7 | 14 Nm | |
| 7AZ Chain tensioner to cylinder head | N55 | M22 x 1.5 | Do not retighten the chain tensioner. Replace sealing ring, thread lightly oiled |
55 Nm |
| 8AZ Screw plug in cylinder head | N55 | M18x1.5 | 25 Nm |
S55 ENGINE (2019-2022):
11 31 CAMSHAFT - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Upper and lower bearing strip of the camshaft of the exhaust camshaft (steel screw 10.9) | S55 | M7x70 | Insert bolts dry. Jointing torque Angle of rotation |
8 Nm 60° |
| 2AZ Eccentric shaft bearing cap to cylinder head | S55 | M6x27 | 8.6 Nm | |
| 3AZ Camshaft bearing cap to intake camshaft cylinder head | S55 | M6x30.5 | 8.6 Nm | |
| 4AZ Chain drive module to cylinder head | S55 | M6x35 | 8 Nm | |
| 5AZ Guide rail to crankcase | S55 | M8 | 20 Nm | |
| 6AZ Guide rail to cylinder head | S55 | M7 | 14 Nm | |
| 7AZ Chain tensioner to cylinder head | S55 | M22 M22 x 1.5 | Do not retighten the chain tensioner. Replace sealing ring, thread lightly oiled. |
55 Nm |
| 8AZ Screw plug in cylinder head | S55 | M18x1.5 | 25 Nm |