12 61 285 Replacing engine oil level sensor: Notes
WARNING:
Hot fluids.
Risk of scalding!
Risk of scalding!
- Conduct all work in the vehicle wearing appropriate personal protective equipment only.
Preliminary work
- Refer to REMOVING THE ACOUSTIC COVER
- Refer to RELEASING THE OIL FILTER COVER
- Release the oil drain plug
- Refer to REMOVING THE FRONT UNDERBODY PROTECTION
- Refer to REMOVING REINFORCEMENT PLATE
- Refer to REMOVING THE OIL-LEVEL SENSOR
- Refer to INSTALLING THE OIL-LEVEL SENSOR
Follow-up work
- Tighten the oil drain plug to 25 Nm
- Refer to INSTALLING REINFORCEMENT PLATE
- Install the front underbody protection
- Top up the motor oil
- Tighten the oil filter cap. Tightening torque: 25 Nm.
- Refer to INSTALLING ACOUSTIC COVER
- Check engine oil level