Vehicle hoist

In the control function "Vehicle hoist", adjustments due to wheel changes or repair work on the vehicle hoist are prevented. The following conditions trigger the "Lifting platform" control function:

• Permissible spring extension exceeded (e.g. more than 50 millimeters, recorded by left and/or right-hand ride height sensor)
• The vehicle is raised slightly (rebound of e.g. less than 55 millimeters), the control operation starts and the vehicle is not lowered

The ride height is stored in the EHC control unit. A reset is performed when the vehicle is again e.g. 10 millimeters under this stored ride height or when drive mode is detected.