86 21... Replacing inside light

Unclip cover (1) at side recess (arrowed) and remove towards bottom.

Fig 1: Removing Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip lamp housing (1) at side recess (arrowed).

Fig 2: Removing Lamp Housing

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect flat connector (1) from flat connector contact.

Fig 3: Identifying Flat Connector And Contact

Courtesy of BMW OF NORTH AMERICA, INC.

CAUTION: Before drilling out rivets, drive in rivet pins with a punch.
Drill out rivets (1). Pull off inside light mounting bracket (2) over flat connector (3).

Fig 4: Identifying Mounting Bracket, Flat Connector With Rivets

Courtesy of BMW OF NORTH AMERICA, INC.