LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> BMW >> 2008 >> 535i Automatic >> Repair and Diagnosis >> Body & Frame >> Towing Systems >> Trailers - Repair >> Hood >> 86 21... Replacing Inside Light Power Cable
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

86 21... Replacing Inside Light Power Cable

NOTE:

Remove inside light cover and lamp housing, refer to REPLACING INSIDE LIGHT .

Remove inside light plug, refer to REMOVING PLUG FOR INSIDE LIGHT .

Carefully remove adhesive bonds of power cable (1) from hood surface.

Installation: 

Carefully remove traces of old adhesive with a scraper.

Use standard heat gun adhesive as adhesive.

Fig 1: Identifying Power Cable
G04766508Courtesy of BMW OF NORTH AMERICA, INC.

Carefully remove adhesive bonds of power cable (1) from hood surface.

Installation: 

Carefully remove traces of old adhesive with a scraper.

Use standard heat gun adhesive as adhesive.

Fig 2: Identifying Power Cable
G04766509Courtesy of BMW OF NORTH AMERICA, INC.

Remove flat connectors (1). Strip cable ends (2) and connect to a new cable. Feed cable connection through opening (3).

Fig 3: Identifying Flat Connectors And Cable Ends
G04766510Courtesy of BMW OF NORTH AMERICA, INC.

Lay new power cable with old power cable through duct (1).

Fig 4: Identifying Power Cable Duct
G04766511Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals