32 00... Move Vehicle Into Normal Position

Necessary Preliminary Tasks:

Check compliance with test conditions, bring vehicle to a stop if necessary. Refer to STEERING AND WHEEL ALIGNMENT - TECHNICAL DATA .
Version With Air Spring System: Carry out ride-height-calibration. Refer to RIDING HEIGHT .
Check vehicle interior and luggage compartment (incl. luggage compartment recess) for load, unload vehicle if necessary
Introduce DIN load (refer to STEERING AND WHEEL ALIGNMENT - TECHNICAL DATA ) into vehicle.
Determine vehicle ride height. Refer to RIDING HEIGHT .

NOTE: If the vehicle ride height is not inside the tolerance (refer to STEERING AND WHEEL ALIGNMENT - TECHNICAL DATA ), the vehicle must be repaired (coil spring/leakage).