CIP 7.22 KMM Error Code "1027" (09 202 03)

Publication date: 2003-04-28
Reference number: 09 202 03

CIP 7.22 KMM ERROR CODE "1027"

TECHNICAL SERVICE BULLETIN

Reference Number(s): B09 202 03, Date of Issue: April 28, 2003

BMW:	E65, E66
GROUP:	09 - Programming/Coding Explanations

SUBJECT

CIP 7.22 KMM Error Code "1027"

COMPLAINT

After replacing a Control Module and selecting the module as being replaced in CIP, KMM error code "1027" is displayed in the final report and programming did not complete.

CAUSE

Software error with 7.22

MEASURE

Answer "No" to question "Have control modules been replaced?". Accept measures plan and finish programming. If replaced control module does not appear in measures plan then "special measure" program control module. Perform "Car Coding" after programming is completed.