LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> BMW >> 2000 >> 528i (E39) L6-2793cc 2.8L DOHC (M52 TU) >> Repair and Diagnosis >> Powertrain Management >> Description and Operation >> Technical Training >> Technical Systems ST050 >> Control Module Coding and Programming >> Powertrain Control Module Programming >> Control Module Identification
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Control Module Identification




Control Module Identification

It is of the utmost importance to know how to properly identify DME control modules prior to programming. The control modules are identified by:







- BMW Part number
- BMW Hardware number
- Bosch Hardware number

These numbers are displayed in the following locations:
- Control module ID label
- Control module ID display using the Diagnostic program of the DIS.


It is essential that the proper BMW part, hardware and Bosch hardware numbers are displayed in the control module. A mis-matched control module can malfunction cause unexplained driveability complaints.
Reference Service Information Bulletin 13 02 90 (3009) regarding control module identification and code numbers.

scientia non olet · About LEMON Manuals