ZCS Encoding Using the DIS

ZCS Encoding Using The DIS

- Connect the 20 pin diagnostic connector to the vehicle and turn the ignition switch on.
- Access the Coding menu from the DIS opening screen.
- The procedure is identical to ZCS encoding with the MoDiC. The Coding menu displays the loaded control module coding program
- Select "1 ZCS CODING" and press the continue button.
- The selected coding program version is displayed. It is always good practice to be aware of the latest version (always be up-to-date with IDC bulletins) and double check it with the loaded version. Press the continue arrow.
- The balance of the procedure is covered in the ZCS section.