LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> BMW >> 1997 >> 328is Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Idle Speed Control Valve >> Removal & Installation (V8)
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal & Installation (V8)

Remove engine cover. See Figure. Disconnect idle speed control valve electrical connector. Remove top of air cleaner. Remove idle speed control valve mounting strap. Pull actuator from throttle body. To install, reverse removal procedure.

Fig 1: Removing Idle Speed Control Valve (4-Cylinder)
G98B11305Courtesy of BMW OF NORTH AMERICA, INC.
Fig 2: Removing Idle Speed Control Valve (6-Cylinder)
G98C11306Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals