LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> BMW >> 1987 >> 325e >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engines >> Engine Specifications >> Valve Specifications
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Valve Specifications

VALVE SPECIFICATIONS

Application Specification
2.5L (1)
Intake
Head Diameter n/a
Face Angle 45.5°
Seat Angle 45°
Seat Width n/a
Stem Diameter In. (mm) .275 (7.0)
Stem Clearance In. (mm) .006 Max. (.15)
Valve Lift n/a
Exhaust
Head Diam. In. (mm) 1.417 (36.0)
Face Angle 45.5°
Seat Angle 45°
Seat Width n/a
Stem Diameter In. (mm) .275 (7.0)
Stem Clearance In. (mm) .006 Max. (.15)
Valve Lift n/a
2.7L (1)
Intake
Head Diam. n/a
Face Angle 45.5°
Seat Angle 45°
Seat Width n/a
Stem Diameter In. (mm) .275 (7.0)
Stem Clearance In. (mm) .006 Max. (.15)
Valve Lift n/a
Exhaust
Head Diam. In. (mm) 1.339 (34.0)
Face Angle 45.5°
Seat Angle 45°
Seat Width n/a
Stem Diameter In. (mm) .275 (7.0)
Stem Clearance In. (mm) .006 Max. (.15)
Valve Lift n/a
(1) Minimum valve head margin on intake valves is .051" 1.3 mm) and .079" (2.0 mm) on exhaust.
scientia non olet · About LEMON Manuals