Bevel Box, Tightening Specification
- Replace The Bolts After Removing Them.
-- Tighten The Bolts In Steps As Follows:
| Step | Bolts | Tightening Specification/Additional Turn |
|---|---|---|
| 1. | -Arrows- | Install All The Way By Hand |
| 2. | -Arrows- | 40 Nm Diagonally |
| 3. | -Arrows- | 90° Additional Turn, Diagonally |
-- Tighten The Bolts In Steps As Follows:
| Step | Bolts | Tightening Specifications |
|---|---|---|
| 1. | -1 And 2- | Install All The Way By Hand |
| 2. | -2- | 40 Nm |
| 3. | -1- | 40 Nm |