Driver Assistance Systems Front Camera -R242-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2022 Audi S6, 2022 Audi A6 Quattro, 2021 Audi S6, 2021 Audi A6 Quattro, and 2020 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
-- Unclip the cover -1- with the clip release lever in direction of -arrows A, B, C- by carefully inserting the clip release lever between the windshield and the cover.
-- Repeat the procedure on the opposite side.
-- Disengage the front cover and remove toward the rear.
-- Free up and disconnect the connector -2-.
-- Release the retainers -1 and 4- and remove the lens -3- forward from the mount in direction of -arrow-.
-- Push the clip -5- toward the vehicle interior -arrow- and guide the support -6- for the driver assistance systems front camera -1- downward and out the mount -7-.
-- Remove the driver assistance systems front camera to the right from the retaining plate mount -2-.
-- Disconnect the connector -3- and antenna wire -4-.