ABS Control Module -J104- /ABS Hydraulic Unit -N55-, REMOVING AND INSTALLING: Notes
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Model S3, gasoline particulate filter, removing:
Refer to OVERVIEW - EMISSIONS CONTROL SYSTEM .
- If the ABS Control Module -J104- is faulty, it can be replaced separately.
- If the ABS Hydraulic Unit -N55- is faulty, it must be replaced together with the ABS Control Module -J104-.
Special tools and workshop equipment required
- Vehicle Diagnostic Tester
- Open Ring Spanner Insert - AF 11mm: VAG1410/6
- Torque Wrench - Universal Joint : VAG1410/7
- Brake Pedal Actuator: VAG1869/2 .
- Bleeder bottle from the Brake Charger/Bleeder Unit: VAS5234
- Wrench - Brake Bleeder Set: VAS5519
- Plug from the Repair Kit: 1H0 698 311 A M10 -item 2- and M12 -item 3-
- Plug from the Assembly Part Set: 5Q0 698 311 M10 -item 1- and M12 -item 2-
- Safety Gloves