Infotainment System Display, Removing And Installing: Notes
Special tools and workshop equipment required
- Vehicle Diagnostic Tester
The Front Information Display Control Head -J685- is located in the center of the instrument panel.
If the Front Information Display Control Head -J685- is being replaced, the following procedure applies:
-- Connecting and switching on the Vehicle Diagnostic Tester.
-- Switch the ignition on.
-- Select and start the Diagnostic operating mode.
-- Select the Test plan tab.
-- Select the Select individual test button and select the following tree structure consecutively:
- Diagnostic-capable systems
- 005F - Information Electronics Control Module 1 - J794 (MIB 3)
- 005F - Information Electronics Control Module 1, functions
- 0636 - Front Information Display Control Head -J685-, replacing
-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.