Night Vision System Camera -R212-, REMOVING AND INSTALLING: Notes
WARNING: This page is about a different car, the 2023 Audi e-tron S and 2023 Audi e-tron Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Removing
- Component location. Refer to COMPONENT LOCATION OVERVIEW - SENSORS AND CONTROL MODULES IN FRONT SECTION OF VEHICLE .
-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Disconnect the connector -4- and free up the wiring harness.
-- Remove the bolts -arrows-.
-- Remove the retaining plate -1- with the night vision system camera.
-- Release the clip -2- and disconnect the washer fluid hose -3-.
-- Remove the bolts -arrows-.
-- Remove the Night Vision System Camera -R212- -1- from the retaining plate -2-.