Windshield Projection Head Up Display Control Module J898, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi Q4 e-tron and 2023 Audi Q4 e-tron. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the windshield. Refer to WINDSHIELD, REMOVING AND INSTALLING .
-- Remove the windshield projection head up display control module cover. Refer to INSTRUMENT PANEL/WINDSHIELD PROJECTION (HEAD-UP DISPLAY) COVER, REMOVING AND INSTALLING .
-- Move instrument panel noise insulation to the side.
-- Cover the windshield projection control module -1- with a soft cleaning cloth.
-- Remove the bolts -arrows-.
-- Remove the windshield projection control module -1- until the connectors are accessible.
-- Disconnect the connectors.
-- Remove the windshield projection control module -1-.