Voice Recognition System, Removing And Installing: Installing

WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Install the Information Electronics Control Module 1 -J794-. Refer to Information Electronics Control Module 1 -J794-, REMOVING AND INSTALLING .

Perform the following function test:

-- Switch on the Radio -R-.

-- Press the PTT button on the multifunction steering wheel briefly.

A "ping" tone sounds and the voice recognition system is active.

-- Say the command "Help".

If the Radio -R- is active, the voice recognition system responds with "Radio commands are...".

Depending on the equipment, other functions can be selected:

-- If a telephone is installed, say "telephone".

The voice recognition system switches to the telephone mode.

-- Press the PTT button for approximately 1 second.

The voice recognition system responds with "Cancel" and is deactivated.