Windshield Projection Head Up Display Control Module, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2021 Audi S8, 2021 Audi A8 e Quattro, 2021 Audi A8 Quattro, 2020 Audi S8, and 2020 Audi A8 e Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Press out the cover -2- from the instrument panel -1- using the : T10383 .
-- Cover the control module -2- with a soft towel.
-- Remove the windshield. Refer to WINDSHIELD, REMOVING AND INSTALLING .
CAUTION:
There is a risk of destroying the windshield projection head up display control module.
- Only remove the designated bolts from the control module.
- Never remove the bolts for the housing upper section.
-- Remove the bolts -1, 3 and 4-.
-- Lift the control module -2- out slightly and disconnect the connectors -3 and 4-.
-- Free up the wiring harness -1- -arrow-.
-- Remove the control module.