Control Arm, Removing And Installing: Notes
Special Tools And Workshop Equipment Required
- Torque Wrench 1332 40-200Nm :VAG1332
- Engine and Gearbox Jack :VAS6931
- Engine/Gearbox Jack Adapter - Wheel Hub Support :T10149
- Puller - Ball Joint :T40010A
- Torque Wrench 1332 Insert - Ring Wrench - 21mm :VAG1332/7
- For a vehicle with air suspension Vehicle Diagnostic Tester
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- Nuts - Control Arm
- Bolts - Control Arm
- Nut - Tire rod