Fwd Vehicles, Checking

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2017 Audi A3, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Test on a One-Axle Roller Test Stand

The operation takes place on a test stand.
For vehicles with manual transmission engage idle.
On vehicles with automatic or dual clutch transmission select the "N" gear.

Test Sequence:

The brake inspection is to be performed on a one-axle roller test stand.
The test speed must not exceed 6 km/h (3.7 mph), otherwise the brakes may lock up due to the roller start-up delay (EDL regulation).
Test stands approved by Audi meet these requirements.