Overview - Assembly Mounts, Vehicles With 8- Or 12-Cylinder Engine
- Right Transmission Mount
- With Transmission Mount Valve 1 -N262-
- Removing and installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING .
- Bolt
- 20 Nm
- Brace
- Bolt
- 20 Nm
- Right Transmission Support
- Removing and installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING .
- Bolt
- 20 Nm
- Bolt
- 40 Nm
- Heat Shield
- Bolt
- 10 Nm
- Not Installed
- Not Installed
- Tunnel Crossmember
- Removing and installing. Refer to TUNNEL CROSSMEMBER, REMOVING AND INSTALLING, VEHICLES WITH 8 OR 12-CYLINDER ENGINE
- Rear Transmission Support
- Removing and installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING
- Nut
- 20 Nm
- Only remove if the transmission mount must be separated from the transmission support
- Bolt
- 40 Nm
- Rear Transmission Mount
- Removing and installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING .
- Lower Stop
- For the rear transmission mount
- Bolts
- 20 Nm + an additional 90° turn
- Always replace
- Only remove if the transmission mount must be separated from the transmission support
- Bolt
- M10 x 55 8.8: 40 Nm
- M10 x 40 10.9: 70 Nm
- Bolt
- 40 Nm
- Left Transmission Support
- Heat Shield
- Bolt
- 10 Nm
- Bolt
- 20 Nm
- Brace
- Bolt
- 20 Nm
- Left Transmission Mount
- With Transmission Mount Valve 2 -N263-
- Removing and installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING
- Bolt
- 20 Nm
- Nut
- 20 Nm