LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2014 >> S6 >> Repair and Diagnosis >> Electrical >> Gauges >> Instruments >> 90 Instruments >> Diagnosis And Testing >> Windshield Projection Head Up Display Control Module -J898-, CALIBRATING >> Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Windshield Projection Head Up Display Control Module -J898-, CALIBRATING: Procedure

Fig 1: Identifying Head-Up Display Calibration Board
GWWA90-10193Courtesy of AUDI OF AMERICA, LLC

-- Move the vehicle onto a secure flat surface.

-- Set the parking brake - the vehicle must not move during the measuring.

-- Fold down the left and right sun visors, disengage them and move them to the side.

-- Attach the Head-Up Display Calibration Board Audi A6 VAS 6657 calibration device to the center retainers -1 and 2- for the sun visors.

-- Use the Vehicle Diagnostic Tester in Guided Fault Finding. Select the function windshield projection head up display control module -J898-.

-- Follow the instructions in the Vehicle Diagnostic Tester display.

-- After calibrating the windshield projection control module successfully, end calibration, turn off the ignition and disconnect the diagnostic connector.

scientia non olet · About LEMON Manuals