September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal And Installation

WARNING: This page is about a different car, the 2016 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

1.

Remove the front floor console. For additional information, refer to Instrument Panel and Console .

2.

Remove the 4 screws and the APIM.
- Disconnect the electrical connector(s).
- To install, tighten to 7 Nm (62 lb-in).

GFD136920

Courtesy of FORD MOTOR COMPANY

3.

To install, reverse the removal procedure.
- If a new APIM is being installed, program the APIM to the correct software level. For additional information, refer to Module Configuration .