LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2013 >> A4 Base >> Repair and Diagnosis >> Quick Lookups >> Technical Bulletins >> Technical Service Bulletins >> Engine Control Systems >> 01 Mil On (DTC P013E00 - O2 Sensor Bank 1 Sensor 2, Delayed Response) (GROUP 01, NO. 17-42)
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

01 Mil On (DTC P013E00 - O2 Sensor Bank 1 Sensor 2, Delayed Response) (GROUP 01, NO. 17-42)

Publication date: 2017-10-26
Reference number: GROUP 01, NO. 17-42
Supersedes refnos: 2037307, 2037307/2, 2037307/3, 2037307/4, GROUP 01, NO. 14-78, GROUP 01, NO. 15-09, GROUP 01, NO. 16-84

01 MIL ON (DTC P013E00 - O2 SENSOR BANK 1 SENSOR 2, DELAYED RESPONSE)

01 MIL ON (DTC P013E00 - O2 SENSOR BANK 1 SENSOR 2, DELAYED RESPONSE)

TECHNICAL SERVICE BULLETIN

Reference Number(s): GROUP 01, NO. 17-42 (2037307/4), Date of Issue:  October 26, 2017
AUDI: A4, A5, A5 Cabriolet, A6, and Q5 2013 - 2014
GROUP: 01 - On-Board Diagnostic
Superceded Bulletin(s): GROUP 01, NO. 16-84, Date of Issue:  October 26, 2016

APPLICABLE MODELS AND YEARS

01 17 42 2037307/4 October 26, 2017. Supersedes Technical Service Bulletin Group 01 number 16-84 dated October 26, 2016 for reasons listed below.

APPLICABLE MODELS AND YEARS

Model(s) Year VIN Range Vehicle-Specific Equipment
A4, A5, A5 Cabriolet, A6, and Q5 2013 - 2014 All Not Applicable

CONDITION

REVISION HISTORY

REVISION HISTORY
Revision Date Purpose
4 - Revised header data (Added Models) Revised Service  (Added Software to Steering Table, updated SVM code, and added a Note)
3 10/26/2016 Revised Warranty  (Updated Claim Type)
2 02/17/2015 Revised header data (Corrected Elsa display) Revised Service  (Added sentence about O2 sensor)

Customer states: 

Workshop findings: 

In the engine control module (ECM), J623 (address word 0001) the following DTC is stored:

TECHNICAL BACKGROUND

ECM software needs to be updated.

PRODUCTION SOLUTION

ECM software update.

SERVICE

Confirm that the Condition  matches exactly, then update the ECM software using the instructions below:

NOTE: Do not  replace the O2 Sensor.

SVM UPDATE INSTRUCTIONS

  1. Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions. 
  2. Update the ECM, J623 (address word 0001) using the SVM action code as listed in the table below, if necessary:
SOFTWARE INFORMATION

Model Engine Old Software Part Number Old Software Version New Software Part Number New Software Version (or higher) SVM Code Input
All 2.0TFSI 8K5907115C 0001-0005 8K5907115C 0006 01A203
All 2.0TFSI 8K5907115K 0002 8K5907115M 0001 01A203
All 2.0TFSI 4G0907115K 0002 4G0907115N 0005 01A203
All 2.0TFSI 8K5907115J 0001-0002 8K5907115N 0005 01A203
All 2.0TFSI 8K5907115N 0003-0004 8K5907115N 0005 01A203
All 2.0TFSI 8R1907115F 0001 8R1907115L 0005 01A203

WARRANTY

WARRANTY INFORMATION

Claim Type: 
  • 110 up to 48 Months/50,000 Miles.
  • 1E1 up to 8 Years/80,000 Miles.
  • G10 for CPO Covered Vehicles - Verify Owner.
  • If vehicle is outside any warranty, this Technical Service Bulletin is informational only.
Service Number:  2470
Damage Code:  0039
Labor Operations:  Update ECM software 2470 2599 50 TU
Diagnostic Time:  GFF No allowance 0 TU
Road test prior to service procedure No allowance 0 TU
Road test after service procedure No allowance 0 TU
Technical diagnosis at dealer's discretion (Refer to Section 2.2.1.2 and Audi Warranty Online for DADP allowance details)
Claim Comment:  As per TSB #2037307/4

All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual  . Claims are subject to review or audit by Audi Warranty.

ADDITIONAL INFORMATION

The following Technical Service Bulletin(s) will be necessary to complete this procedure:

All part and service references provided in this TSB (2037307) are subject to change and/or removal. Always check with your Parts Dept. and service manuals for the latest information.