SAE P2xxx-DTCs: Transmission

DTC	Error Message	Diagnostic Procedure	Malfunction Criteria and Threshold Value	Secondary Parameters with Enable Conditions	Monitoring Time Length	Frequency of checks, MIL Illum
P2637	Torque management Feedback Signal A	Check DME Can-bus connection.	Detection of error signal	CAN bus, Active ECU communication, Active ECU data update, Active	250 ms	Continuous 2 DCY
P2714	Pressure Control Solenoid D Performance or Stuck off	Check pressure regulator valves. Refer to → Pressure regulator valves, checking .	PWM hardware detection, 0 or 100%	Low side and high side FET, Activated Power supply, > 9 V Volage drop at FET, = 1 V Solenoid supply, > 9 V	0.03 Seconds	Continuous 2 DCY
P2715	Pressure Control Solenoid D Stuck On	Check pressure regulator valves. Refer to → Pressure regulator valves, checking .	PWM hardware detection, 0 or 100%	Low side and high side FET, Activated Power supply, > 9 V Volage drop at FET, = 1 V Solenoid supply, > 9 V	0.03 Seconds	Continuous 2 DCY
P2716	Pressure Control Solenoid D Electrical	Check pressure regulator valves. Refer to → Pressure regulator valves, checking .	Detection of wrong input AD value, Feedback current > 1333mA (AD value > 1000) for more than 100 msec Detection of wrong input AD value, Feedback current 23mA (AD value 15) for more than 100 msec Comparison of target current and Feedback current, Sum of difference of two current > 20000	Main solenoid switch, On Linear feedback current, > 23 mA (AD:15) 1333 mA (AD:1000)	0.05 Seconds	Continuous 2 DCY
P2723	Pressure Control Solenoid E Performance or Stuck off	Check pressure regulator valves. Refer to → Pressure regulator valves, checking .	PWM hardware detection, 0 or 100%	Low side and high side FET, Activated Power supply, > 9 V Volage drop at FET, = 1 V Solenoid supply, > 9 V	0.05 Seconds	Continuous 2 DCY
P2724	Pressure Control Solenoid E Stuck On	Check pressure regulator valves. Refer to → Pressure regulator valves, checking .	PWM hardware detection, 0 or 100%	Low side and high side FET, Activated Power supply, > 9 V Volage drop at FET, = 1 V Solenoid supply, > 9 V	0.05 Seconds	Continuous 2 DCY
P2725	Pressure Control Solenoid "E" Electrical	Check pressure regulator valves. Refer to → Pressure regulator valves, checking .	Detection of wrong input AD value, Feedback current > 1333mA (AD value > 1000) for more than 100 msec Detection of wrong input AD value, Feedback current 23mA (AD value 15) for more than 100 msec Comparison of target current and Feedback current, Sum of difference of two current > 20000	Main solenoid switch, On Linear feedback current, > 23 mA (AD:15) 1333 mA (AD:1000)	0.05 Seconds	Continuous 2 DCY
P2732	Pressure Control Solenoid F Performance or Stuck off	Check pressure regulator valves. Refer to → Pressure regulator valves, checking .	PWM hardware detection, 0 or 100%	Low side and high side FET, Activated Power supply, > 9 V Volage drop at FET, = 1 V Solenoid supply, > 9 V	0.05 Seconds	Continuous 2 DCY
P2733	Pressure Control Solenoid F Stuck On	Check pressure regulator valves. Refer to → Pressure regulator valves, checking .	PWM hardware detection, 0 or 100%	Low side and high side FET, Activated Power supply, > 9 V Volage drop at FET, = 1 V Solenoid supply, > 9 V	0.05 Seconds	Continuous 2 DCY
P2734	Pressure Control Solenoid "F" Electrical	Check pressure regulator valves. Refer to → Pressure regulator valves, checking .	Detection of wrong input AD value, Feedback current > 1333mA (AD value > 1000) for more than 100 msec Detection of wrong input AD value, Feedback current 23mA (AD value 15) for more than 100 msec Comparison of target current and Feedback current, Sum of difference of two current > 20000	Main solenoid switch, On Linear feedback current, > 23 mA (AD:15) 1333 mA (AD:1000)	0.05 Seconds	Continuous 2 DCY