Section 11 (Specifications & Procedures)
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2005 Audi allroad, 2004 Audi allroad, 2004 Audi A6, 2003 Audi allroad, and 2003 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
- Vehicle Identification
- Identifying Suspension Variations
- Jacking & Hoisting
- Wheel Alignment Procedures
- Preliminary Checks
- Wheel Alignment Work Sequence
- Caster Adjustment (Front Or Rear)
- Camber Adjustment (Rear)
- Toe Adjustment (Rear)
- Camber Adjustment (Front)
- Toe-In Curve Adjustment
- Notes
- Bringing Vehicle Into Initial Position For Alignment (Suspension Variations 1BA, 1BC, 1BE, 1BG, 1BH, 1BP, 1BT and 1BJ)
- Bringing Vehicle Into Initial Position For Alignment (Suspension Variations 1BB)
- Bringing Vehicle Into Initial Position For Alignment (Suspension Variations 1BY)
- Adjusting Toe-In Curve (All Models)
- Toe Adjustment (Front)
- Special Tools
- Wheel Alignment Specifications