LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2002 >> S8 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Warning Systems >> On Board Diagnostic (OBD) - Abs/EDL/ASR >> Electronic Stabilization Program (ESP) >> Code Control Module (scan tool function 07) >> Notes
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Code Control Module (scan tool function 07): Notes

Coding the ESP control module adapts the control module to the vehicle.

New control modules from the parts distribution center are un-coded and must be coded after being installed.

Coding is only possible if a dealership number is stored in the VAG1551 scan tool.

Before the control module can be coded, "Login Procedure" function 11 must have been successfully carried out using the VAG1551/1552 scan tool. See LOGIN PROCEDURE (SCAN TOOL FUNCTION 11)  .

After the control module is coded, the steering angle sensor -G85- must be zeroed without leaving "Basic Setting" function 04, display group 001. See BASIC SETTING (SCAN TOOL FUNCTION 04)  .

NOTE: If the control module is coded with code 00000 or with a code that does not match the vehicle, the ABS warning light -K47- and the traction control indicator light -K86- light continuously, and the DTC01044 - "Control module incorrectly coded" is stored in the DTC memory of the control module.
scientia non olet · About LEMON Manuals