Removal & Installation (A4)
- Remove trim cover from beneath pull handle and remove 3 screws. Remove screw from top rear of door panel. Lift door panel up to disengage retainers. Disconnect inside door handle release cable from door panel. Disconnect remaining electrical connectors from door panel. Remove door panel from vehicle. Turn door panel over and use small, flat-bladed screwdriver to depress locking tabs on window switch or central door locking switch. Remove switch from switch panel.
- To install, reverse removal procedure. After installation of new components or disconnecting and reconnecting battery, run power window to fully closed position. Release switch. With window fully closed, press switch in up position again for one second. This will reactivate the "express" feature.