LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 1996 >> A4 Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Knock Sensor (KS) >> Removal & Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal & Installation

The KS I and KS II are located beneath intake manifold. KS can be removed without removing intake manifold. Disconnect negative battery terminal. Using a long 8-mm Allen Wrench (3247), remove KS mounting bolt and KS. To install, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS  .

scientia non olet · About LEMON Manuals