Front Axle
WARNING: This page is about a different car, the 1996 Audi Cabriolet and 1995 Audi Cabriolet. However, it is still accessible from the selected car via links, so may be relevant.
Loosen front and center ball joint-to-control arm nuts. Attach Camber Adjustment Lever (3196) to lower control arm. See Fig 1 . Loosen rear ball joint-to-control arm nut. Adjust camber to specification. Tighten ball joint-to-control arm nuts to 48 ft. lbs. (65 N.m). Recheck camber. Ensure that difference between left and right wheel camber is less than .5 degree.