LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 1994 >> 90S, CS V6-2.8L (AAH) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Testing and Inspection >> Scan Tool Testing and Procedures >> Scan Tool Testing >> With MMS 300 Engine Management System >> Display Groups For Basic Setting & Measuring Block Value >> Display Group Diagnostic Charts >> Display Group 019
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Display Group 019

Display Group 019

^ The display groups 011 through 019 apply to driveability troubleshooting (idle problems and/or loss of power) and special component malfunctions.

Display Group 019 Overview:





Note for display field 1:

^ The momentary engine load is an ECM internal calculation value that is calculated from the air inducted under normal conditions-air pressure 1013 mbar, intake air temperature 20°C (68°F).

scientia non olet · About LEMON Manuals