LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 1991 >> 100 Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Lubrication >> Checking Fluid Level >> Draining & Refilling
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Draining & Refilling

  1. Remove transaxle protection plate (if equipped). Remove rear pan bolts and loosen front pan bolts. Carefully lower pan and drain as much fluid as possible. Remove oil pan and pour out remaining fluid. Remove filter. Clean oil pan in solvent and blow dry with compressed air.
  2. Install NEW filter and tighten screws to specification. Install oil pan and a NEW oil pan gasket. Tighten oil pan bolts to specification. Install protection plate and tighten bolts to specification. See TORQUE SPECIFICATIONS  table. Add specified type and amount of ATF. See RECOMMENDED FLUID and FLUID CAPACITIES. Start engine and recheck fluid level.
scientia non olet · About LEMON Manuals