LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 1991 >> 100 Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Ignition Checks >> 2.3L >> Primary Resistance
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Primary Resistance

  1. On version 1, disconnect ignition coil power stage connector and ignition coil wire. See Figure . On version 2, disconnect ignition coil power stage connector and remove screw from top of assembly. See Figure .
  2. On both versions, connect Multimeter (US 1119) between ignition coil positive (+) and negative () terminals. See Figure and Figure . Reading should be .5-1.5 ohms. If reading is not as specified, replace ignition coil.
  3. If primary resistance is within specification but there is no ignition, replace ignition coil and power stage as an assembly.
scientia non olet · About LEMON Manuals