October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Removal & Installation
- Remove air filter and unscrew stop bracket. Using heat gun, heat locking compound on fastening bolt. Remove bolt slowly. DO NOT damage threads. Clean locking compound from bolt hole threads.
- Install airflow sensor plate. Ensure 5 dimple marks are up. Lightly tighten self-locking screw. Ensure sensor plate is centered and rest position is correct. To complete installation, reverse removal procedure. See TORQUE SPECIFICATIONS table at the end of article.